Brecknell Scale Setup

Owned by Cameron Bolourchi
Aug 03, 2018
1 min read
  1. Plugin the scale into a USB port and power it on
  2. Download the USB-COM drivers from Brecknell's website.
    1. http://www.brecknellscales.com/downloads/CH341SER__X32_X64.zip
  3. Unzip them into a folder of your choice
  4. Go to Device Manager
  5. Select the Unknown device from the list of ports and select the driver to install from the folder you unzipped.
  6. Test connectivity with putty serial connection using the virtual com port you created with speed 9600.
  7. Output should display weight values.